● Monitor: the full power parameters and switch status of a total of 48 branches of A+Bdual AC outlets
● Communication: 1 RS485 (Modbus-RTU)
● Auxiliary power: Powered by AMC100-ZA; DC 12-24V powersupply when used alone





|
Instrument model |
AMC100-FAK30 |
AMC100-FAK48 |
|
|
Measurement parameters |
Voltage, current, frequency, active power, reactive power, power factor, active energy, reactive energy, 2-31 times total current harmonic content |
||
|
Bus voltage |
Rated |
220VAC |
|
|
Measuring range |
±20% |
||
|
Overload |
Instantaneous voltage 2 times/sec |
||
|
Current outlet loop |
Rated |
50mA |
|
|
Range |
0.125~60mA |
||
|
Overload |
Continuous 1.2 times, instantaneous 10 times/sec |
||
|
Input frequency |
AC45~65Hz |
||
|
Measure |
Outlet |
Voltage/current/active power/active energy level 0.5, reactive power/reactive energy level 1 |
|
|
Auxiliary power |
Powered by AMC100-ZA; DC 12-24V power supply when used alone |
||
|
Environment |
Temperature |
Work: -15℃~55℃ Storage: -25℃~70℃ |
|
|
Humidity |
Relative humidity≤93% |
||
|
elevation |
≤2500m |
||
|
Communication |
RS485/Modbus-RTU |
||
|
Installation Method |
DIN35mm rail or bottom plate installation |
||
|
Protection level |
IP20 |
||
|
Pollution level |
2 |
||
|
Security |
Insulation |
The insulation resistance between all terminals and the conductive parts of the shell is not less than 100MΩ |
|
|
Withstand voltage |
The voltage and current signals of circuit A//the voltage and current signals of circuit B//other ports meet AC2kV for 1min, the leakage current should be less than 2mA, and there is no breakdown or flashover. |
||
|
Electromagnetic compatibility |
Anti-static interference |
Level 4 |
|
|
Resistance to radio frequency electromagnetic field radiation |
Level 3 |
||
Shop our new arrivals and best sellers. Click on the image to see product details and click Buy to add a product to cart. We are committed to give you the best buying experience!