Engineer monitoring electrical equipment temperature remotely on a tablet in front of switchgear panels
SOLUTION · WIRELESS TEMPERATURE MONITORING
Wireless Temperature Monitoring System
Battery-free sensors on live electrical connections in substations, switchgear, transformers and busbar trunking. 15-second sampling, GFSK wireless, local display or SCADA integration.
WHY WIRELESS TEMPERATURE MONITORING
Loose joints burn switchgear down — before anyone notices

A 10 °C rise at a busbar joint doubles the contact resistance. It heats further, arcs, trips the feeder or burns the cabinet — and overheating connections are the No.1 cause of switchgear fires.

Infrared checks only happen once a year, with the door open, on the panels someone happens to walk past. By then the joint has been running hot for months.

Wireless sensors clamped on the joint read temperature every 15 seconds, with the door closed. Over threshold — relay trip, screen alarm or push to your phone — hours before failure. No shutdown to install, no battery on the heavy-load type.

SYSTEM STRUCTURE
Acrel wireless temperature monitoring system topology
SYSTEM ADVANTAGES
Why engineers choose wireless over wired or manual
01
Installs on live equipment
The sensor clamps on the joint under normal operating current. No need to de-energize the feeder for installation.
02
No inter-cabinet wiring
Sensors talk to the receiver over GFSK 433 MHz. The wired RS485 run is only between receiver and display — not from every joint.
03
CT-powered on heavy loads
ATE400 draws operating energy from the conductor current. No battery, no replacement cycle, design life over 10 years.
04
15-second continuous sampling
Records a full temperature trend, not a snapshot. Rate-of-rise and 3-phase imbalance are visible on the display.
05
Dual-threshold alarm with relay output
High-temp pre-alarm and over-temp trip on independent thresholds. Two relay contacts drive external annunciators or PLC inputs.
06
Scales from 1 to 240 points
Start with one critical panel. Add sensors and receivers later — same GFSK protocol, same RS485 Modbus-RTU output.
CERTIFICATIONS & STANDARDS
Tested to international standards
CE and RED certificate
CE & RED
CE certificate
CE
RoHS certificate
RoHS

ATE / ATC series certified to CE & RED; wired ARTM family certified to RoHS and CE. Suitable for export to Europe, Southeast Asia, South America and the Middle East.

ON-SITE INSTALLATION
What it looks like in the field
Wireless temperature sensor installed on busbar
Receiver mounted inside switchgear cabinet
Wireless temperature sensor installation in field
On-site wireless temperature monitoring installation
Acrel wireless temperature sensor deployed in switchgear
Substation wireless temperature monitoring site
Tell us where you need to watch
Send us the site type (substation / transformer / switchgear / busbar), voltage class and number of connection points. We'll send back a tailored bill of materials with the right sensor, receiver and display package — within 1 working day. MOQ 1 unit, OEM / ODM accepted.
Mia · Market Manager for Peru, Acrel · Shanghai HQ, 300286.SZ